Danby dim1524w Owner's Manual download pdf (Page 19)

8

Operating Instructions

Self-Clean Mode

The self-clean mode should be

put into operation before you

use your ice maker for the first

time and/or if there has been a

long period without use.

Stage 1

• Add equal parts of water and

vinegar (1:1) to the ice maker’s

reservoir.

• With the power off, press the

increase and decrease arrows

simultaneously two times to

activate the self-clean mode.

Please note, the self clean

mode with automatically initiate

approximately 10 seconds after

the last button depression.

• During the self clean mode,

the upper ice bucket is filled

and dumped multiple times and

the pump will remain in contin-

uous operation as it feeds

water to the bucket and evapo-

rator coils. This cycle contin-

ues for approximately five-and-

a-half minutes.

Upon completion, the unit auto-

matically powers down and is

now ready for stage 2.

Stage 2

• Drain the cleaning solution

from the internal reservoir by

removing the rear drain cap

and plug (see pg. 9).

• Add fresh water to the ‘Fill

line’ in the internal reservoir.

• With the power off, press the

increase and decrease arrows

simultaneously two times to

activate the self clean mode-

which will now act as a rinse.

Upon completion of this final

stage of the self clean process,

the unit automatically powers

down once again. Proceed to

drain the water from the inter-

nal reservoir and leave the lid

on the ice maker open to allow

it to air dry.

1 Add water & vinegar (1:1)

2 With the power off,

simultaneously depress

the increase & decrease

arrows twice.

3 Drain after program is

complete.

4 Add fresh water to fill line.

5 Repeat Step 2

6 Drain after program is

complete.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

Comments to this Manuals

No comments