Danby DPA100D1MDD User Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 37
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
OPERATING INSTRUCTIONS
Cool mode
When the A/C enters Cool mode automatically, or Cool mode is selected after the unit is turned on, the Cool indicator
symbol lights up.
Press the Up or Down buttons to adjust the temperature setting in the range 17°C-30°C (62°F- 86°F).
Press the Speed button to choose High/ Medium/ Low fan speed.
Fan mode
Press the mode button on the control panel or the Fan button on the remote control to select Fan mode. The Fan
indicator symbol lights up to show that the unit is operating in Fan mode.
Press the Speed button to choose High/ Medium/ Low fan speed.
The temperature cannot be set in Fan mode.
Dry mode (dehumidifying function)
When you wish to run the unit in Dry (dehumidifying) mode, perform the following change to the drain at the back of
the unit. Turn the unit off and unplug it. Remove the exhaust pipe assembly. Unscrew the drain cover, pull out the wa-
ter plug, and attach a drain hose. The drain hose can be a common garden hose which can be screwed directly onto
the threads of the drain. Ensure that you place the other end of the hose into an appropriate drain (e.g. a oor drain),
to prevent water from leaking onto the oor. Restart your unit.
Press the mode button on the control panel or the remote control to select Dry mode. The Dry indicator symbol lights
up on the LCD display window to show that the unit is operating in Dry mode.
Upon entering Dry mode, if the room temperature is 15°C (59°F) or greater, the compressor will start to operate. If the
room temperature is 13°C (55°F) or less, the compressor will shut off. When the temperature rises again to 15°C, the
compressor will restart (there will be a 3 minute delay in order to protect the compressor).
In Dry (dehumidifying) mode, the fan will default to run at Low speed, and the speed cannot be adjusted.
The temperature cannot be set in Dry mode.
NOTE: When choosing Dry (dehumidifying) mode, please remove the exhaust pipe assembly. Otherwise, it will affect
dehumidifying performance and the display window will indicate “FL”.
Auto mode
Press the Mode button on the control panel or on the remote control to select Auto mode. The Auto indicator symbol
lights up to show that the unit is operating in Auto mode.
After choosing auto mode, the operation setting is determined by the ambient temperature. When ambient tempera-
ture is higher than 25°C (77°F), the operation setting is the same as that of Cool mode; when it is lower than 25°C
(77°F), the operation setting is the same as that of Fan mode.
Max Cool mode (optional)
When in Cool mode, press the TIMER and UP buttons at the same time to enter Max Cool mode.
In Max Cool mode, the A/C will cool regardless of temperature restrictions.
In Max Cool mode, the fan will default to run at High speed, and the speed cannot be adjusted.
To cancel Max Cool mode press the TIMER and UP buttons again.
Sleep mode (optional)
When in Cool mode, press the TIMER and DOWN buttons at the same time to enter Sleep mode.
In Sleep mode, the set temperature will increase by 1° (C or F, depending on the current setting of the unit) every 2
hours, for the rst 4 hours of operation. After this, the set temperature will not change further.
In Sleep mode, the fan will default to run at low speed, and the speed cannot be adjusted.
NOTE:
To switch between degrees Celsius and Fahrenheit, press the Up and Down buttons on the control panel at the same
time.
The “swing louvers” option is only available from the remote control.
7
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 36 37

Comments to this Manuals

No comments