POWER;
Press the POWER keypad to turn the unit onlofL
"COOLING" and "FAN"mode. The green pilot light
directly above the COOL or FAN mode wilt
illuminate, identifying the selected mode Is
operational
_k TEMPERATURE SETTINGS:
Press the up keypad to increase the set (operating)
temperature of the air conditioner, Each time the
keypad is pressed the temperature is increased as
follows;
2OF (Farenhetght Scare) Maximum Setting 90OF
loC (Celsius Scale) Maximum Selling 31oc
Y TEMPERATURESETTINGS:
Pressthe down keypadto decreasethe set
(operating)temperatureof the airconditioner.Each
time the keypad [spressedthe temperatureis
decreasedas foflows;
2OF(FarenheightScale)MinimumSetting60OF
t °C (CelsiusScale)MinimumSetting16°C
SWING:
Press the SWING keypad to activate the automatic
air swing (oscillation) feature.The green pilot light
adjacent to the SWING keypad wilt tliuminale,
identifying"theselected mode is operattonal.'The
vertica! louvers will oscillate back and forth (side to
side) automatically sweeping cold air alternately for
comfortable cooling.To stopthe air swing feature,
press the SWING keypad again, the green pilotItght
adjacent to the keypad will go oil
(ENERGY SAVER):
To acthlale the ENERGY SAVER feature, press and
hold the "SWING" keypad for 3 seconds,
The green pilot]ight directly above the ENERGY
SAVER mode willilluminate, identfying the selected
mode is operational. The ENERGY SAVER program
helps to reduce energy (electricity) consumption by
controlling (limiting) operation of the fan motor with
the operation (cycles) of the compressor_Leo
compressor off/fan off
compressor on / fan on
ff the ENERGY SAVER feature is not activated, the
fan will operate continuously,even after the
compressor has cycled off. t.e.
compressor on t fan on
compressor off / fan on
NOTE: The energy saver feature operates in
"cooling" mode onty,
'TIMER:
Pt'ass this keypad to activate the "auto start / auto
stop" timer programs. Auto start/stop programs can
be programmed from 0 ~ 12 hours Each
depression of the TIMER keypad will increases the
selected ttme in 1 hour increments.
AUTO -START:
Before activatingthe "auto - start" program,you must
first select (sol) the operatingconditionsof theair
conditioner.(i,,e.temperature setting and fan speed)_
Once thesettings am complete, theair conditioner
must be switched off. (non-operational)
Depress theTIMER keypadandthe auto-start time
wlilappear inthe LED display, select the required
time (0-. 12hours)and the aircbnditionerwillstart
automat|callyat theestablishedttme,
AUTO -STOP:
Turn the air conditioner on and select the required
operating cond[tionso(Le. temperature setting and
fan speed). Depress the TIMER keypad end the time
w_llappear in the LED display, select the required
auto stop time, (0 - 12hours) and the air conditioner
will stop automatically at the established time.
NOTE: It is not posslb_leto operate both the
"auto-start" and "auto-stop" feature within a
single program. All auto-timed programs are
automatically erased after the set program is
complete.
ONETOUCR;
Press this keypad to activate a pre-set (factory)
temperature setting of 22°C + I - 2oc (71,6°F). The
air conditioner will operate and maintain the indoor
temperature at Ibis setting.
MODE:Press this keypad to select the appropriate
operating mode. (Fan t Cool) Each depression of
the MODE keypad wtli alternate between the
11
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals