ATTENTION
GROUNDING INSTRUCTIONS
This appliance must be grounded, tn
the event of an eJectr_calshort circuit
grounding reduces the risk of electrical
shock by providing an escape wire for the
electrical current,, This appliance is
equipped with a cord having a grounding
wire with a grounding plug The plug must
be plugged into an outlet that is properly
installed and grounded.
WARNING - Improper Use of the
grounding plug (_anresult in a risk of electric
shock, Consult a qualified electrician or
servicema n if the grounding instructions are
not completely understood, or if the doubt
exists as to whether the appliance is
properly grounded
DO NOT USE AN EXTENSION CORD
Use an exclusive waltoutlet Do not connect
your refrigerator to extension Cords dr
together with any other appliance in the
same wal_ outlet Do not splice the cord
IMPORTANT WARNING
An empty refrigerator is a very dangerous
attraction to children Remove either the
gasket, latches, lids or doors from unused
appliances, or take some other action that
wilt guarantee it harmless
DANGER: Rfsk of child entrapment Before you Lhrow away
your old refrigerator or freezer:
• Take off the doors
• Leave the shelves _n place so that chtldren may
not easilyclimbInside
DON'T WAIT DO IT NOW!
Remove the exterior and interior packings, wipe
the outside thoroughly with a soft dry cloth and
the inside with a wet, lukewarm cloth Avoid
placing the cabinet in a narrow recess or near
any heat source, direct sunlight, or moisture.
Let air circulate freely around the cab[neL Keep
the rear of the refrigerator 5 inches away Irom
the wall
LocatiOn
I Select a place with a strong, level floor
2 Allow 5 inches of space between the back of
the refrigerator and any adjacent walt
3 Avoid direct sunlight and heat Direct
sunlight may affect the acrylic coating
Heat sources nearby will cause higher
electricity consumption
4 Avoid very moist places, Too much moisture
in the air will cause frost to form very quickly
on the evaporator, and your refrigerator will
have to be defrosted very frequently
To avoid vibration, the cabinet must be set level.
To start the refrigerator, turn the t'_mperature
control to the position correspor_ding to the
desired cooling The refrigerator temperature
will vary depending on the quantity of the food
stored and on the frequency with which the door
is opened
Turn the control to the "O "position to
temporarily disconnect the cooling cycle. After
defrosting and if the refrigerator has been left out
of use for some time, set the control to maximum
for 2 to 3 hours before turning to the desired
position. When the refrigerator is not to be used
for a tong period of time, disconnect the plug and
leave the door partially open.,
Note: Wait 3 to 5 minutes before restarting if
operation has been interrupted
Ice Cube Tray
Fig, C
Ice cube tray is flexible Twist tray to remove
ice cubes If the ice cube tray is frozen hard to
the evaporator surface, run a little water over the
tray Never use a knife or other metal instrument
to remove Ice cube tray because this may
damage the evaporator. (Fig_ C)
(13 pages)
(5 pages)
(15 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals