Danby DUFM505WDB User Manual download pdf (Page 8)

4. Place a leveling tool on top of the freezer first side to side,

then front to back. Turn leg counterclockwise to raise a corner.

Turn leg clockwise to lower a corner.

5. Repeat Step 4 until freezer is level.

6. After freezer is fully loaded with food, recheck with level as in

Step 4.

FREEZER USE

Ensuring Proper Air Circulation

In order to ensure proper temperature, you need to permit proper

airflow in the freezer. As shown in the illustration, cool air enters

through the freezer wall and moves down. The air then

recirculates through the vent near the bottom.

Do not block any of these vents with food packages. If the vents

are blocked, airflow will be restricted, and temperature and

moisture problems may occur.

IMPORTANT: To avoid odor transfer and drying out of food, wrap

or cover foods tightly.

Using the Control

Turn the freezer temperature control to 4. This setting is designed

to maintain the temperature at or near 0°F (-17.8°C) under normal

operating conditions.

Allow the freezer to cool 6 to 8 hours before filling with frozen

food. Let the freezer cool overnight before adding large amounts

of unfrozen food. Do not add more than 2 to 3 lbs (907 to 1,350 g)

of unfrozen food per cubic foot (28.32 L) of freezer space.

NOTE: When the freezer is first started, the compressor will run

constantly until the freezer is cooled. It may take up to 6 or

8 hours (or longer), depending on room temperature and the

number of times the freezer door is opened. After the freezer is

cooled, the compressor will turn on and off as needed to keep the

freezer at the proper temperature.

The outside of your freezer may feel warm. This is normal. The

freezer’s design and main function is to remove heat from

packages and air space inside the freezer. The heat is transferred

to the room air, making the outside of the freezer feel warm.

Adjusting Control

■ Turn control to a higher number for colder temperatures.

■ Turn control to a lower number for less cold temperatures.

NOTE: The small snowflake icon represents the number 1 or

the least cold setting. The large snowflake icon represents 6 or

the coldest setting.

Fast Freeze (on some models)

This setting causes the freezer to run continuously, driving the

freezer temperature to the coldest possible temperature. To

activate, adjust the control knob to the igloo icon, which

represents the fast freeze setting. Use this feature just before

adding large amounts of unfrozen foods. For best food quality, do

not exceed 3 lbs (1,350 g) per cubic foot (28.32 L). Return to your

normal setting after 24 to 48 hours.

Temperature Alarm (on some models)

The temperature monitor alarm is located to the left of the

temperature control and sounds an audible alarm if the

temperature reaches 10°F (-12°C) or more above normal for the

selected setting.

The alarm is controlled by a three-position switch.

Key Eject Lock

(on some models)

To lock or unlock the freezer, you must hold the key in the lock

while turning. The lock is spring loaded, so the key cannot be left

in the lock.

If the key is lost, contact your dealer for a replacement. Always

give the model and serial number of your freezer when requesting

a replacement key.

| The proper setting for normal freezer use. The alarm

is on, and the amber light will be illuminated.

0 Keeps the alarm from sounding when the freezer is

warm, such as during start-up or defrosting.

✔ Tests the alarm regardless of temperature.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Comments to this Manuals

No comments

Danby DUFM505WDB User Manual Page 8

Comments to this Manuals

Related products and manuals for Freezers Danby DUFM505WDB