Danby DUF808BSLE User Manual download pdf (Page 3)

DOOR REVERSAL

INSTRUCTIONS

1) To access the lower hinge

assembly, tilt back the freezer

cabinet or lay the freezer on its

back. (Fig.A)

2) Remove both leveling legs

located at the front of the

cabinet.

3) Remove the screws holding

the lower hinge assembly to the

cabinet.

4) Remove the main door

assembly from the freezer

cabinet (lift door slightly and

pull downward).

5) Using a flat head

screwdriver, remove the main

door top hinge pin.(Fig.B)

6) Re-install the main door top

hinge pin on the opposite side of

the cabinet.

7a) Remove the door plug and

door bushing located on the top

of the main door.

7b) Interchange their positions

(eg.door plug right side, door

bushing left side).

8) Re-install main door

assembly on cabinet.

9) Remove door bushing

(bottom door) and install on

opposite side.

10) Re-install the lower hinge

assembly on the opposite side.

11) Make sure the door

assembly is properly aligned on

the cabinet before tightening

lower hinge screws.

12) Re-install both leveling legs.

The process is now complete.

Fig. A

Fig. B

CAUTION: To avoid personal injury to yourself and/or property, we recommend

someone assist you during the door reversal process.

OPERATION

To start the freezer, turn the temperature control to the position corresponding to the

desired cooling.

0 = No Cooling 1= Minimum Cooling

3, 4 = Medium Cooling MAX= Maximum Cooling

The freezer temperature will vary depending on the quantity of the food stored and

on the frequency with which the door is opened.

DEFROSTING

INSTRUCTIONS

IMPORTANT: Do not use an ice pick, knife or other

sharp-pointed tool to defrost freezer. Damage can

occur.

1) Turn temperature control to ‘0’(off) and unplug

power cord.

2) Remove all frozen food.Wrap frozen food in

several layers of newspaper and cover with a blanket.

Food will say frozen for several hours OR store

frozen food in a cooler, additional refrigerator-freezer

or in a cool area.

3) Place pans of hot water in freezer with door open

to speed melting. Directing air from an electric fan

into freezer will also help. Do not place fan in freezer.

4) Remove frost.

5) Wipe water from walls and bottom of freezer with

a towel or sponge.

6) Wash inside walls.

7) Rinse and dry thoroughly.

8) Replace all frozen food.

9) Plug in power cord and refer to “Operation.”

OPERATING INSTRUCTIONS

Defrost and clean your freezer when frost has built up to about 1 1/4”(6mm) thickness.

Complete defrosting and cleaning should be done at least once a year. In high humidity

areas, a freezer may need more frequent defrosting and cleaning.

To avoid vibration, the cabinet must be set level.This is accomplished by adjusting the (2)

front leveling legs located under the freezer cabinet.

1 2 3 4 5 6 7 8 ... 13 14

Comments to this Manuals

No comments

Danby DUF808BSLE User Manual Page 3

Comments to this Manuals

Related products and manuals for Freezers Danby DUF808BSLE