Danby DCD5505W User Manual download pdf (Page 6)

If the user moves the EID on another drying program as one program is already

running, the new one is not taken into account. For the Gorenje dryer type, the

display board must continue its normal operation.1

The Start button is inhibited in this case also.

If the dryer was in the anti-crease or in the end phase, the user can restart a new

program only by pushing the Start button after opening the door or switch off then

switch on the Mains switch.

5. DRYING PROGRAM FLOW

THE DRYING PHASE

The programs from 1 to 9 have a control of the humidity level in the drum. So the

end of this phase occurs when the required humidity threshold is reached, or

when the timeout (180 min) of the sequence occurs (safety if the heating element

or the humidity sensor is out of order).

The programs 10 to 14 have a fixed time of drying phase.

Especially for the program 15, there isn’t the drying phase.

Motor rhythm : 237” ON - Direction 2 / 3” OFF / 5” ON - Direction 1 / 3” OFF

Heating element: 2” OFF / 234” ON / 12” OFF

Pump: 4” OFF / 20” ON / 224” Off

Off

Motor

Heating

element 1

Pump

Off

Dir 2

Stop

Dir 1

2s 20s 212s 3s 3s

2s 1s 5s

THE COOLDOWN PHASE

When the required humidity threshold or the timeout of the sequence are

reached, the program starts its cool-down phase. It lasts 10min.

Motor rhythm : 3” OFF / 237” ON - Direction 2 / 3” OFF / 5” ON - Direction 1.

The first 3” OFF avoid the problem of direction changing.

Heating element: OFF

Pump: 4” OFF / 20” ON / 224” OFF.

1 2 3 4 5 6 7 8 9 10 11 ... 22 23

No comments

Danby DCD5505W User Manual Page 6