Danby DCD5505W User Manual download pdf (Page 5)

The End led is lighted from the beginning of the anti-crease phase and is

extinguished when the mains supply is cut off.

Tank led does not exist on air-vented drier.

End

Tank

ID2

ID1

Normal

Store

Extra

Anticrease

4. PROGRAM SELECTION AND START

1. After the switching on of the mains supply, the user must move the EID on

one of the 15 drying programs except the position 0.

2. When the code is stable for more than 0.6”, the user can push the START

button to validate his choice.

3. The buzzer is activated during 2”.

4. There aren’t the power parts activating during 4”from Start button pushing (2”

after the end of buzzer). During this waiting time, if the chosen program is 1 to

9, the corresponding led blinks.

5. At the end of the waiting time, the selected program is started, the heater is

activated, the drum turns.

4”

Drying program start

Buzzer ON 2

”

Program selection Push the START button

0.6" min.

When the machine is running, the only way to modify the program is to move the

EID on the 0 position during more than 0.6”, then to place it on the new selected

program and go back to step 2 of the description below.

1 2 3 4 5 6 7 8 9 10 ... 22 23

No comments

Danby DCD5505W User Manual Page 5