Danby DBC434A1BSSDD User Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 33
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
This appliance must be grounded.
In the event of an electrical short
circuit, grounding reduces the risk
of electric shock by providing an
escape wire for the electric cur-
rent.
This appliance is equipped with a
power cord having a grounding
wire with a grounding plug. The
plug must be plugged into an out-
let that is properly installed and
grounded.
Consult a qualified electrician or
service technician if the grounding
instructions are not completely
understood, or if doubt exists as
to whether the appliance is prop-
erly grounded.
If the outlet is a standard 2-prong
wall outlet, it is your personal
responsibility and obligation to
have it replaced with a properly
grounded 3-prong wall outlet.
For best operation, plug this appli-
ance into its own electrical outlet
to prevent flickering of lights,
blowing of fuse or tripping of
circuit breaker.
Do not under any circumstances
cut or remove the third (ground)
prong from the power cord.
Do not use an adapter plug with
this appliance.
Do not use an extension cord
with this appliance. If the power
cord is too short, have a qualified
electrician or service technician
install an outlet near the
appliance.
GROUNDING
INSTRUCTIONS
WARNING!
Improper use of the ground-
ing plug can result in a risk of
electrical shock.
LOCATION
REQUIREMENTS
DO...
Select a location with a
strong, level floor.
Allow 5 inches of space
between the back of the
appliance and any adjacent
wall.
Avoid direct sunlight and
heat. Direct sunlight may
affect the acrylic coating,
heat sources nearby will
cause higher electricity
consumption.
DO NOT...
Use this appliance
outdoors: This appliance is
intended for household use
only. Do not attempt to
operate or store this
appliance outdoors.
Build this appliance
into an enclosure: This
appliance is designed for a
free-standing application
only and is not intended to
be “built-in”.
Allow 13 1/4” (33.7 cm) of
space between the (hinge)
side of the door and any
adjacent wall to
accommodate door swing.
13.25
in.
5 in.
3
Important Safety Information
Installation Instructions
Page view 4
1 2 3 4 5 6 7 8 9 10 ... 32 33

Comments to this Manuals

No comments