Danby DBC434A1BSSDD User Manual download pdf (Page 11)

Problem Possible Cause What to do

No Power. A fuse in your home may Replace fuse or reset circuit breaker.

be blown or the circuit

breaker tripped.

Power surge. Unplug the beverage centre, wait a

few seconds and then plug it back in.

Plug not fully inserted into Make sure the 3-prong plug on the

wall outlet beverage centre is fully inserted into

outlet.

Cabinet Temperature Temperature setting Verify the temperature control setting.

too High Adjust if neccessary.

Door(s) not shut properly Ensure that the doors are fully closed

or opened excessively and that the gaskets are sealing

against the cabinets. Open the doors

only as needed and for short periods

of time.

Recently added a large Limit the quantity of warm bottles

quantity of warm bottles being introduced to the cabinet at the

to the cabinet same time. Attempt to phase in the

load introduction if possible.

)

“Clicking” Noise Normal sound No user intervention is required as

this sound is normal during the opera-

tion of the appliance. This audible

‘clicking’ noise may be heard as the

appliance ends or begins a cooling

cycle.

Condensation on the High humidity conditions The condensation will subside once

cabinet and/or doors in the home humidity conditions return to normal.

Door(s) not shut properly Ensure that the door is fully closed

or opened excessively and that the gasket is sealing against

the cabinet. Open the door only as

needed and for short periods of time.

Occasionally, a problem may arise that is minor in nature, and a service call may not be necessary. Use this trou-

bleshooting guide for a possible solution. If the unit continues to operate improperly, call an authorized service depot or

Danby’s Toll Free Number 1-800-263-2629 for assistance.

Troubleshooting

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 32 33

No comments

Danby DBC434A1BSSDD User Manual Page 11