Danby SILHOUETTE DPAC120061 User Manual download pdf (Page 7)

Window / Patio Door Kit Installation

(Air Conditioning Mode ONLY)

Your window kit has been designed to fit most

standard “vertical” / “horizontal” windows and patio

doors up to a maximum height of 80”. For vertical

window and/or patio door applications, lock

positions are provided in each slider sction. Wing

nuts are also provided to secure the sections

togethor (see Fig. 5a).

Rain Hood Assembly

1) Fold both sides of

the Rain Hood 90

as so

the flanges are facing

outward. Fig 1

2) Slide the Rain Hood

flanges onto the edges of

the slider kit until it is

lined up with the intake

vent (shown in Fig 2). Once the mounting holes on

the slider, as well as the Rain Hood are aligned,

secure the Rain Hood to the slider with the four

mounting screws provided.

IMPORTANT:

• For horizontal window kit applications refer to

figure 3a for correct Rain Hood insert positioning.

• For vertical window kit applications (including

patio) refer to figure 4a for correct Rain Hood insert

positioning.

1) Select a suitable location,making sure you have

access to an electrical outlet.

2) Install both flexible hoses to the rear side of the

unit. Both hoses are identical and can be installed

into either opening. Insert the hose collar with the 2

lock tabs into the 2 slots on the top of each

opening and twist to lock into position.

3) Install the adjustable Window/Patio Door Slider

Kit as required. Fig’s. 3, 4, 5.

4) Install the window exhaust adapters into the

openings in the slider section, making sure the

window slider sections are secure.

Important:: Ensure the exhaust adapter labeled “air

intake” is installed on the hose that is connected to

the air intake opening on the back of the unit.

Horizontal Window

Window Slider Kit

Minimum: 28" (71.1 cm)

Maximum: 48

/8" (123 cm)

Vertical

Window

Fig. 3

Fig.4

Patio

Door

Patio Door Kit

Minimum: 28" (71.1 cm)

Maximum: 80" (203 cm)

Fig. 5

Fig.

Please Note: In a vertical application, the

exhaust hose MUST be positioned above

the

intake hose in the window slider. See Fig 5.

This will avoid having the exhaust heat go

through the intake and back into the unit.

Window Slider Kit

Minimum: 28" (71.1 cm)

Maximum: 48

8" (123 cm)

Fig. 3a

Fig. 2

Fig. 1

Rain hood inserts are

installed in “A” and “B”

postions with vent open-

ing facing down (C)

Fig.4a

Intake hose

adapter

Rain

Hood

Slider kit

Rain hood inserts are

installed in “A” and “C”

positions with vent open-

ing facing down (B)

Rain Hood is to be installed only over air intake vent

Air exhaust

Air intake

Plug the unit into a 115 V / 60 Hz grounded

electrical outlet.

1 2 3 4 5 6 7 8 9 10 11 12 ... 40 41

Comments to this Manuals

No comments

Danby SILHOUETTE DPAC120061 User Manual Page 7

Comments to this Manuals

Related products and manuals for Conditioners Danby SILHOUETTE DPAC120061