Danby PREMIERE DPAC12010H User Manual download pdf (Page 5)

Air Conditioning Mode ONLY

Your window kit has been designed to fit most

standard “vertical”/”horizontal” windows up to a

maximum height of 80” (203cm). For vertical

window applications, multi lock positions are

provided on the edge of each slider section to secure

each sliding section together.

1) Select a suitable location, making sure you have

access to an electrical outlet.

2) Install the flexible hose to the rear side of the unit.

Insert the hose collar on top of the exhaust opening

and twist to lock into position.

3) Install the adjustable Window Slider Kit as

required (see Fig. 3a & 3b).

4) Install the opposite end of the flexible exhaust

hose into the window exhaust adapter.

5) Install the window exhaust adapter into the

opening in the slider section, making sure the

window slider sections are secure.

6) Plug the unit into a 115V/60Hz grounded electrical

outlet.

Window Slider Kit:

Min.: 28

/3” (67.5cm)

Max.: 80” (203cm)

Window

Slider Kit:

Min.: 28

/3”

(72cm)

Max.: 80”

(203cm)

Horizontal Window

Vertical

Window

There should be at least 11.8” (30cm) clearance between the unit

and any other objects or building structures, and should be installed

on a level surface. The unit does not have to be vented outside

during Dehumidifying or Fan Only mode operation.

Flexible Exhaust Hose (13cm) & Exhaust nozzle connector (2

pcs) from 17

/10” (45cm) up to 53

/6” (135cm)

Adjustable window door slider kit (3 pcs) from 28

”(72cm) up to

80” (203cm)

Fixture..... (2 pcs)

Screws......(12 pcs)

NOTE: The exhaust/window kit must be installed at all times when

the unit is operating under AIR CONDITIONING mode.

ELECTRIC SHOCK HAZARD: To avoid the possibility of personal injury, disconnect

power to the unit before installing or servicing.

Back of Window Pane

Tube Adapters

Fig. 2

Instructions for Assembling the Window Kit- Fig. 2

1) Insert tube adapters through the back of the window panel.

2) Secure each tube adapter with four screws through the front of the

window panel.

3) Insert window panel extensions into window panel. Lightly tighten

the screws in the window panel to hold the extensions in place.

Fig. 3a

Fig. 3b

INSTALLATION

WARNING

WINDOW KIT

Fig. 1

INSTALLATION ACCESSORIES

Flexible Exhaust Hose

Exhaust Nozzle

Connector

Fixture

Adjustable Window Slider Kit:

28 1/3” (72cm)- 80” (203cm)

Screws

Water hose (79”/ 200cm)

www.sylvane.com 1-800-934-9194

1 2 3 4 5 6 7 8 9 10 ... 19 20

Comments to this Manuals

No comments

Danby PREMIERE DPAC12010H User Manual Page 5

Comments to this Manuals

Related products and manuals for Conditioners Danby PREMIERE DPAC12010H