Danby PREMIERE DPAC12010H User Manual download pdf (Page 3)

READ ALL SAFETY INFORMATION BEFORE USING

1) Check available power supply and resolve any wiring

problems BEFORE installation and operation of this unit.

All wiring must comply with local and national electrical

codes and be installed by a qualified electrician. If you have

any questions regarding the following instructions, contact a

qualified electrician.

2) This appliance draws 10.8 nameplate amps under Cooling

Mode and may be used in any properly wired, general

purpose 15 amp household grounded receptacle.

3) For your safety and protection, this unit is grounded through

the power cord plug when plugged into a matching wall

outlet. If you are not sure whether the wall outlets in your

home are properly grounded, please consult a qualified

electrician.

WARNING: Improper connection of the grounding plug can

result in risk of Fire, Electric Shock, and/or injury to Persons

associated with the appliance. Check with a qualified service

representative if in doubt that the appliance is properly grounded.

4) DO NOT USE PLUG ADAPTERS OR EXTENSION

CORDS WITH THIS UNIT. If it is necessary to use an

extension cord with this unit, use an approved “air

conditioner” extension cord only (available at most local

hardware stores).

5) To avoid the possibility of personal injury, always

disconnect the power supply to the unit before installing

and/or servicing.

TABLE 1

Suggested Individual Branch Circuit

Nameplate Amps *AWG Wire Size

10.8 16

AWG- American Wire Gauge

*Based on copper wire at 105°C temperature rating.

TABLE 2

Receptacle and Fuse Types

Rated Volts 125

Amps 15

Wall Outlet

Fuse Size 15

Time Delay Fuse Plug Type

(or Circuit Breaker)

Control Panel

Air Outlet

Signal Receptor

Castor

Air Intake

(Evaporator)

Handle

Air Intake Hose

Air Outlet Hose

Water Outlet Drain

Power Supply Cord

PART IDENTIFICATION

CAUTION: Do not leave this unit

unattended in a space where people or

animals that cannot react to a failed unit

are located. A failed unit can cause

extreme overheating or death in such an

enclosed, unattended space.

ELECTRICAL

SPECIFICATIONS

IMPORTANT SAFETY INFORMATION

www.sylvane.com 1-800-934-9194

1 2 3 4 5 6 7 8 ... 19 20

Comments to this Manuals

No comments

Danby PREMIERE DPAC12010H User Manual Page 3

Comments to this Manuals

Related products and manuals for Conditioners Danby PREMIERE DPAC12010H