Danby DPAC5009 User Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
OPERATION (cont’d)
7
The AUTO-TIMER feature offers a unique selection of multiple choice, fully automatic on and/or off
(start/stop) programs between 1-24 hrs under any one mode of your Home Comfort unit. The programs are as
follows:
a) Auto-Off: Pre-select a time that will turn off the unit automatically (between 1-24 hrs).
b) Auto-On: Pre-select a time that will turn on the unit automatically (between 1-24 hrs).
Note: These functions must be performed daily, as the program is automatically canceled/erased after the
program has ended.
Press the Timer button on the remote control to set the timer. The “ON” or “OFF” logos (depending on timer
mode “A” or “B” below) will appear in the display panel, the clock symbol will flash for approximately 10
seconds, and the display panel will show the time of 8 hrs. While the clock symbol is flashing, press the UP
and DOWN buttons on the remote control to select the time (in hours, between 00 and 24) for either
of the timer modes “A” or “B” as detailed below. The time selected will be shown on the display panel and
after approximately 10 seconds the clock symbol will remain illuminated together with either the “ON” or
“OFF” logo.
Timer mode A) Auto Off: With the machine on and running, set the timer to select the number of hours you
would like the unit to run until it automatically shuts off. The set time will be shown in the display together
with the clock symbol and “OFF” logo.
Timer mode B) Auto On: Switch the machine on using the ON/OFF button (either on the machine itself or
on the remote control) so that the machine is running and the desired mode is selected. Press the ON/OFF
button again to put the machine in stand-by mode. Set the timer to select the number of hours until it is
required for the machine to start up automatically. The set time will be shown in the display together with the
clock symbol and the “ON” logo.
If the time has been set as in either “A” or “B” above, and it is then decided that the timer is not required,
pressing the CANCEL button will turn the timer off.
AUTO-TIMER
TIMER SETTING
CONTROL
TIMER CANCEL
CONTROL
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Comments to this Manuals

No comments