Danby DPAC5009 User Manual download pdf (Page 5)

Air Conditioning Mode ONLY: Your window kit

has been designed to fit most standard “vertical”/

”horizontal” windows up to a maximum height of 80”

(203cm). For vertical window applications, multi lock

positions are provided on the edge of each slider

section to secure each sliding section together.

1) Select a suitable location, making sure you have

access to an electrical outlet.

2) Install the flexible hose to the rear side of the unit.

Insert the hose collar on top of the exhaust opening

and twist to lock into position.

3) Install the adjustable Window Slider Kit as

required (see Fig. 4a & 4b).

4) Install the opposite end of the flexible exhaust

hose into the window exhaust adapter.

5) Install the window exhaust adapter into the

opening in the slider section, making sure the

window slider sections are secure.

6) Plug the unit into a 115V/60Hz grounded electrical

outlet.

Window Slider Kit:

Min.: 28

/3” (67.5cm)

Max.: 80” (203cm)

Window Slider

Kit:

Min.: 28

/3”

(72cm)

Max.: 80”

(203cm)

Horizontal Window

Vertical

Window

WINDOW KIT

INSTALLATION

Back of window panel

Tube Adapters

Fig. 2

Instructions for Assembling the Window Kit- Fig. 2

1) Insert tube adapters through the back of the window panel.

2) Secure each tube adapter with four screws through the front of the

window panel.

3) Insert window panel extensions into window panel. Lightly tighten the

screws in the window panel to hold the extensions in place.

Fig 3a

Fig 3b

INSTALLATION

ELECTRIC SHOCK HAZARD: To avoid the possibility of

personal injury, disconnect power to the unit before installing or

servicing.

Caution: To avoid installation/operation difficulties, read these

instructions thoroughly.

Flexible Exhaust Hose (13cm) & Exhaust nozzle connector (2

pcs)... from 17

/10 (45cm) to 53

/6” (135cm)

Flexible Exhaust Hose (11cm) & Exhaust nozzle

connector (2pcs)...from 15

/4” (40cm) to 51

/5” (130cm)

Adjustable window door slider kit (3 pcs)... from 28

/3”(72cm) to

80” (203cm)

Fixture..... (2 pcs) & Screws..... (8 pcs)

NOTE: The exhaust/window kit must be installed at all times when

the unit is operating under AIR CONDITIONING mode. There

should be at least 11.8” (30cm) clearance between the unit and any

other objects or building structures, and should be installed on a

level surface.

Fig. 1

INSTALLATION ACCESSORIES

Flexible Exhaust Hose

Exhaust Nozzle

Connector

Fixture

Adjustable Window Slider Kit:

28 1/3” (72cm)- 80” (203cm)

Screws

Water hose (79”/ 200cm)

1 2 3 4 5 6 7 8 9 10 ... 19 20

Comments to this Manuals

No comments

Danby DPAC5009 User Manual Page 5

Comments to this Manuals

Related products and manuals for Conditioners Danby DPAC5009