Danby DAC5111M Operations Instructions download pdf (Page 9)

Operating Instructions

CONTROLS

SELECTOR SWITCH: The selector switch controls fan speed and/or cool-

ing speed. To set desired cooling temperature, simply rotate the

SELECTOR knob to the appropriate setting.

FAN SPEEDS:

• LOW FAN will circulate air at minimum speed without cooling.

• HIGH FAN will circulate air at maximum speed without cooling.

COOLING MODES:

• LOW COOL provides cooling with minimum air circulation.

Recommended for night-time use.

• HIGH COOL provides cooling with maximum air circulation.

Recommended for quick cooling or for extremely hot days. Once room is

cooled, reduce setting to LOW COOL.

• OFF shuts-down the unit completely

NOTE: Always allow 3 minutes before switching from one mode to

another.

THERMOSTAT: The thermostat automatically controls the (compressor)

cooling cycle and maintains the selected room temperature. To set the

thermostat, rotate the thermostat knob to the desired cooling setting (1

warmest - 7 coldest). The fan motor will continue to operate after the com-

pressor (cooling) has cycled off. This is normal.

IMPORTANT

When using FAN control, turn selector switch slowly, allowing unit

to adjust. When using THERMOSTAT, be sure to allow three min-

utes before changing temperature. Adjusting too quickly may cause

compressor to overload.

Thermostat

Selector

Switch

OFF

arrêt

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 22 23

No comments

Danby DAC5111M Operations Instructions Page 9