Danby D9504S Owner's Manual download pdf (Page 5)

Instructions for Use

6

Choosing the Right Place

Place the appliance in a dry and regularly

ventilated room. Allowed ambient temperature

depends on the model (class) of the appliance

and is stated on the rating plate of the

appliance.

Never place the appliance near heat emitting

devices (e.g. cooker, radiator, water heater or

similar devices) and do not expose it to direct

sunlight.

The appliance should be positioned at least 3

cm away from electric or gas cooking

appliances and at least 30 cm away from oil or

coal fired stoves. If this is not possible, use an

appropriate insulation barrier.

Behind the appliance there should be free

space at least 200 cm_ wide and above the

appliance kitchen units (cupboards) should be

at least 5 cm away from the appliance in order

to assure adequate ventilation of the

condenser unit.

Class

Ambient temperature

SN (sub-normal)

from + 10°C to + 32°C

N (normal)

from + 16°C to + 32°C

ST (sub-tropical)

from + 18°C to + 38°C

T (tropical)

from + 18°C to + 43°C

Installation

• Place the appliance firmly on a solid base.

Some appliances have adjustable feet on the

front side; use them to level the appliance.

• Two spacers attached to the appliance must

be fitted onto the upper edge of the

condenser, thus preventing the appliance

from being installed too close to the wall.

Spacers are manufactured for all-purpose

function depending on the distance of the

condenser from the wall. Therefore turn

spacers correspondingly and fix them to the

appliance.

WARNING

Instructions pertaining to the risk of fire, electric

shock, or injury to persons.

Grounding Instructions

For your personal safety, this appliance

must be grounded. In the event of a

malfunction or breakdown, grounding will

reduce the risk of electric shock by providing a

path of least resistance for electric current. This

appliance is equipped with a power cord

having an equipment grounding conductor and

grounding plug. The plug must be plugged into

an appropriate wall outlet that is installed and

grounded in accordance with all existing local

codes and ordinances. Consult a qualified

electrician or seviceman if the grounding

instructions are not clearly understood, or if

doubt exist as to whether the appliance is

properly grounded.

Connection to Power Supply

Connect the appliance power cord and plug to

a properly grounded wall outlet. The required

nominal voltage and frequency are indicated

on the rating plate (inside the unit or on the

exterior rear wall of the unit) This appliance

resist temporary voltage tolerance up to –12 to

+10%.

Description of the Appliance

1 2 3 4 5 6 7 8 9 10 ... 13 14

Comments to this Manuals

No comments