Danby D9504S Owner's Manual download pdf (Page 3)

Instructions for Use

4

Before Putting Into Use

• Before connecting the appliance to electrical

power supply, leave it stand for about 2

hours, which will reduce the possibility of

malfunctions in the cooling system due to

transport handling.

• Clean the appliance, and be thorough,

especially in the interior (See Cleaning and

Maintenance).

• In case the interior accessories are not

correctly placed, rearrange them as described

in chapter "Description of the Appliance".

Instructions for Use

These instructions for use are intended for the

user. They describe the appliance and correct

operating procedures for safe use.

SAVE THESE INSTRUCTIONS:

We Care for the Environment

• Our products use environmentally friendly

packaging, which can be either recycled or

disposed of in an environmentally friendly

manner. To this end, individual packaging

materials are clearly marked.

• These instructions are printed either on

recycled paper or chlorine free bleached

paper.

• When your appliance finally wears out,

please try not to burden the environment with

it; call your nearest authorized service agent.

(See Disposing of the Worn Out Appliance)

Tips for Energy Savings

• Try not to open the door too often, especially

when the weather is hot and humid. Once

you open the door, close it as soon as

possible. This is especially important if you

have an upright model.

• Every now and then check if the appliance is

sufficiently ventilated (adequate air circulation

behind the appliance).

• Set thermostat from higher to lower settings

as soon as possible (depends on how loaded

the appliance is, ambient temperature etc).

• Before loading the appliance with packages

of fresh foods, make sure they are cooled to

ambient temperature. (excluding soup)

• Ice and frost layers increase energy

consumption, so clean the appliance as soon

as the frost layer is 3-5 mm thick.

• If the gasket is damaged or the door seal is

poor, energy consumption is substantially

higher. To restore efficiency, replace the

gasket.

• The condenser on the rear wall should be

always clean, free of dust or any impurities.

• Always consider instructions stated in

sections Positioning and Energy Saving Tips,

otherwise the energy consumption is

substantially higher.

1 2 3 4 5 6 7 8 ... 13 14

Comments to this Manuals

No comments