Danby DPAC8399 User Manual Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
Auto-Timer Instructions
NOTE: Auto-Timed programs cannot be set with the
hand held remote control. The TIME OF DAY
CLOCK must be set before the AUTO-TIMER
feature will operate.
The AUTO-TIMER feature offers a unique selection
of multiple choice, fully automatic on/off (start/stop)
programs between 0 - 23 hrs, 50 min. under any one
mode of your Portable 4 Season Home Comfort unit.
The programs are as follows:
a) Auto -Off: Pre-select a time that will turn off the
unit (automatically) at a specified time (between
0 - 23 hrs, 50 min.). This function must be
performed daily, (if required) as the program is
automatically canceled/erased upon completion.
b) Auto-On: Pre-select a time that will turn on the
unit (atomatically) at a specified time (between
0 - 23 hrs, 50 min.). This function must be
performed daily, (if required) as the program is
automatically canceled/erased upon completion.
c) Auto-On & Auto-Off: Pre-select a time that will
turn on and turn off the unit (automatically) at
specified times (between 0 - 23 hrs, 50 min.).
This program contains built-in memory. Unlike
programs a) and b) above. This program
automatically stores into memory the selected
times and will repeat daily, (same specified times)
until the program is overridden and/or canceled.
Any interruption to the electrical power supply
of the unit automatically cancels/erases all
auto timed programs. In the event this should
happen, you will be required to re-set
your program.
Setting the AUTO-ON TIMER
Before setting the AUTO-ON timer, the TIME OF
DAYCLOCK must be set/operational. You must
also select the appropriate MODE and settings (FAN
SPEED, TEMP, SWING etc.) you will require under
the AUTO TIMED program.
1) Turn the unit “on” (I/O switch).
2) Select the appropriate MODE under which
you want the unit to operate (Cool-Dry-Heat-
Fan). Fig. 29.
3) Select the appropriate FAN SPEED setting,
under which you want the unit to operate. (Hi,
Med, Low) (excluding Dehumidifying, as this
mode has “1” fan speed setting only). Fig. 30.
4) If you desire oscillation (auto-swing) push the
SWING key pad (the “air swing” symbol will be
displayed in the display window). Fig. 31.
Fig. 29
Fig. 30
Fig. 31
Air Swing
Mode
Selection
Fan Speed
Instrucciones para graduar la
HORA DEL DÍA (Reloj):
1) Presione y sostenga la tecla de CLOCK (RELOJ) durante tres (3)
segundos. La visualización del reloj centelleará indicando “12.00”
durante unos 10 segundos. Figura 8.
2) Presione ya sea la tecla o para entrar la hora correcta del
día. Cada vez que presione la tecla, aumentará o disminuirá la
graduación de la hora del día (incrementos de 1 minuto). Figura 9.
3) Cuando se haya establecido la hora correcta del día en la ventana
de visualización, presione la tecla de CLOCK (RELOJ)
nuevamente para activar la graduación del reloj con la HORADEL
DÍA. Los “dos puntos” entre la HORADELDÍA comenzarán a
centellear indicando que el reloj está funcionando.
Nota importante: Toda interrupción en el suministro de corriente
eléctrica cancelará automáticamente el programa del reloj de HORA
DELDÍA. En este caso, se deberá volver a graduar el programa
del reloj.
Instrucciones de operación del
acondicionador de aire
1) Instale la Manguera Flexible de Escape - figura 10 –y el Juego
Graduable de Corredera para Ventana/Puerta de Patio según
se ilustra en las figuras 2, 2a y 2b (página 45).
2) Oprima la tecla I/O (encendido/apagado) para encender la unidad.
3) Oprima la tecla de MODO hasta que la palabra COOL (FRÍO)
aparezca en la ventana de visualización de cristal líquido (LCD
según sus siglas en inglés). Figura 12. Cada vez que se
oprima la tecla de MODO, se adelantará a una graduación de
modo diferente. (Frío–Seco (Deshumidificador)-
Calor–Ventilación.).
4) Oprima la tecla o correspondiente para seleccionar una
graduación de temperatura adecuada. La temperatura
seleccionada quedará indicada en la ventana de visualización de
cristal líquido (LCD según sus siglas en inglés). Las
graduaciones de temperatura se pueden cambiar entre
17°C (63° F) y 30°C (88°F). Figura 13.
La luz indicadora verde se encenderá indicando que el modo de aire
acondicionado está funcionando (es posible que haya una pequeña
demora de 10-30 segundos antes de que el ciclo comienzo, lo que
es normal).
Fig. 10
Fig. 8
Fig. 9
Fig. 12
Luz verde
Modo de aire
acondicionado
Fig. 13
Temperatura
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Comments to this Manuals

No comments