Danby DAC7024DE Specifications download pdf (Page 12)

POWER:

Press the POWER keypad to lure the unit on/off

A TEMPERATURE SETTINGS:

Press the up keypad to increase the set (operaling)

temperature of the air conditioner Each time lhe

keypad is pressed the temperature is increased as

feflows;

2°F (FarenheIghl Scate) Maximum Setting 90"F

I "0 (Celsius Scaie) Maximum Setting 31°C

Y TEMPERATURE SETTINGS:

Press the down keypad to decrease the set

(operating) temperature of the air conditioner+ Each

lime the keypad is pressed the temperature is

decreased as Iollows;

2°F (Farenheight Scale) Minimum Setting 60'+F

1°C (Celsius Scale) Minimum Setting 16+C

SWING:

Press the SWING keypad to activate the automatic

air swing (oscillalion) feature+ "The green pilot light

adjacent to the SWING keypad wil! illuminate,

identilying the selected mode is operational+ The

vertical louvers will oscillate back and forth (side to

side) automatically sweeping cold air allernately for

comfortable cooling+ To stop the air swing feature,

press the SWING keypad again, the green pilot light

adjacent to the keypad will go off..

(ENERGY SAVER):

To activale the ENERGY SAVER feature, press and

hold the "SWING" keypad for 3 seconds.

The green pilot light directly above the ENERGY

SAVER mode will Illuminate, ldent;-y+ngthe selecled

mode is operational. The ENERGY SAVER program

helps Io reduce energy (elecldcily) consumption by

controlling (limiting) operation of the fan motor wilh

tPieoperation (cycles) of lhe compressor. I+e,+

compressor off I fan off

compressor on t fan on

If the ENERGY SAVER feature is not activated, the

fan will operate continuously,even after the

compressor has cycled off. ire

compressor on / fan on

compressor off I |an on

NOTE: The energy saver feature operates in

"cooling" mode only.

direotly above the COOL or FAN mode wil!

Ifluminale, identifying the selected mode Ls

operational+

TIMER:

Press this keypad to activate the "auto slart I auto

slop" timer programs. Aulo start]slop programs can

be programmed from 0 - 12 hours. Each

depression of the TIMER keypad will increases the

selected lime in 1 hour increments.

AUTO _START:

Before activating the "aulo - start" program, you

must first select (set) the operating conditions of the

air conditioner_(Le+temperature selling and fan

speed). Once the settings are complete, the air

condiliener must be switched off. (non-operaliona!)

Depress theTIMER keypad and the auto-start time

will appear in the LED display, select the requtred

time (0 .- 12hours) and the air conditioner will start

automatically at the established time.

AUTO +STOP:

Turn the air conditioner on and setec{ the required

operating condilions+ (i.e temperature setting and

fan speed)_ Depress the TIMER keypad and the time

will appear in the LED display, select the required

auto stop lime, (0 - 12hours) and the air conditioner

will slop automatically at the established time.

NOTE: It Is not possible to operate both the

"auto-start" and "auto-stop" feature within e

single program. All auto-timed programs are

automaticaUy erased after the set program is

complete.

ONE TOUCH=

Press this keypad to activate a pro-set (factory)

temperature setting of 22°C + / - 2+C (71+6°F)+The

air conditioner wiIt operate and maintain the Indoor

temperalure at this selling..

MODE:Press this keypad to select the appropriate

operating mode. (Far+ ! Coo!) Each depression of

the MODE keypad witt alternate between the

"COOUNG" and "FAN" mode The green pilot ligh!

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 29 30

Comments to this Manuals

No comments

Danby DAC7024DE Specifications Page 12

Comments to this Manuals

Related products and manuals for Air filters Danby DAC7024DE