Danby DDR7009REE User Manual download pdf (Page 5)

1) POWER Button: On / Off

2) FAN SPEED Button: High / Low

3) TIMER Button: When unit is operating, press

TIMER to set number of hours desired until unit will

shut off.When unit is in stand-by, press TIMER to set

number of hours desired until unit will turn on.

Setting timer from 1-24 hours. To cancel the timer,

proceed as above but set the “timer off” to zero (0)

hours.

4) °C/°F Button: Press the °C/°F button to toggle

between Celsius and Fahrenheit.

5) Receiving Sensor

6) SET HUMIDITY/CURRENT HUMIDITY

DISPLAY: When machine is running, it displays the

current humidity. Press UP or DOWN buttons to

select humidity setting. The humidity is adjusted in

increments of 5% by each press. Adjustable range is

within 30% RH to 90% RH. 10 seconds after

setting humidity, the display will change back to the

current humidity.

7) CURRENT TEMP/ TIMER SET DISPLAY:

When machine is running, it displays the current

temperature. Press the TIMER button to set the

machine to shut off automatically after specified

amount of time. 10 seconds after displaying the timer,

the display will change back to current temperauture.

8) DEFROST LIGHT: When temperature is low,

unit enters defrost mode and defrost light illuminates.

9) BUCKET FULL LIGHT: When water tank is

full, bucket full light illuminates.

OPERATING INSTRUCTIONS

REMOTE CONTROL

1) Power Key: On / Off

2) Fan Speed Key: High/Low

3) On / Off Timer Key:

In running mode: Auto switch Off

In standby mode: Auto switch On

4) Temperature display selector button

(Celsius / Fahrenheit): Press the°C/°F

switch button to toggle between °C and °F.

5) Timer/ Temperature Buttons:

A) Used for adjusting the timer and

thermostat.

B) The default display is room

temperature.

C) When “+” or “-” button is pressed,

the set temperature is displayed and may

be adjusted. After 10 seconds the display

will revert back to room temperature.

The remote operates within a range of 6

meters (16.4 ft.)from the receiver located

inside the main unit. Any obstruction

between the receiver and remote may

cause signal interference, limiting the

ability to program the main unit.

This Class B digital apparatus complies

with Canadian ICES-003.

BATTERIES: Remove the cover on the back of the remote controller and insert the

batteries with the (+) and (-) poles pointing in the proper direction.

CAUTION: Use only AAA or IECR03 1.5V batteries. Remove the batteries if the

remote controller is not used for one month or longer. Do not attempt to recharge the

supplied batteries. All batteries should be replaced at the same time. Do not dispose

of the batteries in a fire as they may explode.

The functions work the same as your dehumidifiers touch controls.

1 2 3 4 5 6 7 8 9 10 ... 19 20

Comments to this Manuals

No comments

Danby DDR7009REE User Manual Page 5

Comments to this Manuals

Related products and manuals for Air equipment Danby DDR7009REE