Danby DDR45E User Manual download pdf (Page 8)

OPERATING INSTRUCTIONS (cont’d)

INSTALLING PVC

DRAIN HOSE

When using the continuous drain function, the PVC hose must be placed horizontally

below the drainage hole. Avoid uneven ground and folding the hose.

NOTE: Should you damage or misplace the pvc drain hose, a standard garden hose

can be used.

CONTINUOUS

DRAIN

The function of continuous drain can be performed using the following steps:

Drain hose

Drain cover

Back of the unit

Soft rubber

stopper

Drain cover

Drain hose

Drain cover

Drain hose

Bucket

1) To save having to periodically empty the water tank, this unit can

be configured for continuous drain. You can use the supplied

drain hose to connect to the continuous drain connector.

2) Unscrew and remove the drain cover at the rear of the unit (Fig.

A).

3) Remove the soft rubber stopper, and place it in the water tank for

safe keeping (Fig. B).

4) Insert the drain hose through the hole of the drain cover (Fig. C).

5) Ensure the rubber seal ring is properly seated in the end of the

hose as shown in Fig. C.

6) Connect the drain hose to the drain port (Fig. D).

7) Tighten the drain cover in clockwise direction onto the rear of

the unit (Fig. D).

8) Place the bucket in its original location (Fig. E).

Fig. A

Fig. B

Fig. C

Fig. D

Fig. E

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

No comments

Danby DDR45E User Manual Page 8