Danby DDR45E User Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
• Select a suitable location, making sure you have easy access to an electrical outlet (avoid the use of
extension cords). If it is absolutely necessary to use an extension cord, use an approved “air conditioner”
heavy duty extension cord ONLY (available at most local hardware stores).
• Make sure there are no obstructions restricting airflow through the front air intake grill. Maintain a minimum
clearance of at least 20 cm (8”) between adjacent walls and the back of the unit, to allow for proper air
circulation and maximum efficiency. To obtain maximum operating efficiency from your dehumidifier, the
recommended (room ambient) operating temperatures should be between 6°C (42.8°F)- 35°C (95°F).
• It is important to remember the efficiency of a dehumidifier will be effected/influenced by the rate at which
new humid air (moisture) is allowed to infiltrate the same space/area. To maintain efficiency, the
dehumidifier must be operated in an enclosed area. Keep all doors and windows closed.
INSTALLATION INSTRUCTIONS
LOCATION
3
CASTOR
INSTALLATION
NOTE: Castor installation is recommended to avoid damage to floors.
1) Remove the castors from the bucket of the dehumidifier.
2) Position the dehumidifier on its side.
3) Locate the arrow on the bottom of the dehumidifier and insert
the castor according to the arrow direction.
4) Slide the castor in as far as it will go. The castor will snap into
place.
5) Repeat steps 1 to 4 for the other 3 castors.
Page view 3
1 2 3 4 5 6 7 8 9 ... 19 20

Comments to this Manuals

No comments